Homeowners and professional craftsmen both have to have a caulk gun in their tool chest. the caulk gun allows you to apply caulk, adhesives and other thick materials that are dispensed from a tube.
Caulk is used in many areas around your home. It helps you to create a waterproof barrier to keep your house protected from damage that water can cause. The best caulk gun is one that a beginner or homeowner can easily operate but is sturdy enough to be used by the professional carpenters, plumbers, electricians, and craftsmen.
The following list of best caulking gun impressed us greatly
Dripless Ergo Composite
Weight: 1.1 pounds
Dimensions: 3 x 7.5 x 16.5
Capacity: 10 ounces
Newborn 930-GTD Caulking Gun
Weight: 1.5 pounds
Dimensions: 11 x 4 x 4
Newborn 250 Caulking Gun
Weight: 1.9 pounds
Dimensions: 2 x 14 x 9
Albion Engineering Manual Sausage
Weight: 3.2 pounds
Dimensions: 4 x 6 x 15
3 in 1 Caulking Gun
Weight: 1.1 pounds
Dimensions: 13 x 7 x 2.4
Albion Engineering Manual Cartridge Caulk Gun
Weight: 1.8 pounds
Dimensions: 9 x 14.3 x 2.3
The 6 Best Caulk Gun Reviews in the Market
1. Dripless Ergo Composite Caulk Gun
This is a manually operated caulk gun. It is a frame that the caulk tube rests in, it has a trigger that you pull which depresses a rod against the bottom of the tube so the rod applies pressure to the caulk in the tube and forces the caulk out the opening on the end of the tube.
It is lightweight and has an ergonomic handle which makes the caulking applicator more comfortable to hold. There is a hook on the back of the caulking gun so you can easily hang the gun from your ladder while you are working, or from your tool belt.
It is designed to hold the 10-ounce tubes of caulk. It has a 12:1 thrust ratio that makes it capable of applying caulk, latex, silicone and more.
The rotating barrel of this caul applicator will allow you to make the same bead of caulk go into the places you need it to go when working around corners so you do not have to stop and change the position of the applicator in your hands.
2. Newborn 930-GTD Caulking Gun
This caulking applicator has a ten to one thrust ratio so you can easily apply all manners of silicone, latex and other caulk derivatives that come in the ten-ounce tubes.
It is a best manual caulk gun that has a cradle for holding the tube of caulk and a rod that is depressed when you pull the trigger. The rod presses against the bottom of the caulk tube and applies pressure so the contents of the tube are pushed up and out.
This rod is designed to operate with a lesser amount of force, and every time you stop pulling the trigger the rod retracts so there is less possibility of the contents of the tube oozing out or dripping.
It is quieter and easier to operate than the applicators that are ratchet style. The handle and the trigger of this caulking gun is padded so you will have added comfort while using it.
3. Newborn 250 Rod Revolving Frame Caulk Gun
The steel revolving frame of the Newborn 250 super smooth rod revolving frame caulking gun accommodates the ten-ounce tubes of caulk, including silicone and latex, acrylics, adhesives, asphalt, butyl, and cement. This manual caulking gun has a revolving barrel that rotates the tube in the cradle so you maintain the exact bead orientation even when you work around corners. You do not have to constantly reposition the caulking applicator.
This gun comes with a puncture tool that will open the seal on your tube. There is also a spout cutter on the side of the gun that eliminates your need for a knife to open your caulk tubes.
This is a manually operated caulk applicator. It has an 18:1 thrust ration and a smooth action rod that requires a low amount of pressure to push the caulk out of the tube.
The handle and the trigger are made from a zinc alloy so they are corrosion resistant.
4. Albion Engineering Caulking Gun
This is an aluminum frame caulk gun that is lightweight and has a full sized handle that is comfortable to hold. The larger handle also increases the efficiency in which the caulking gun dispenses the caulk from the tube. You do not have to apply a great amount of pressure to force the caulk from the tube.
This is a versatile caulking gun that can be used with the ten ounces, thirteen ounces, and twenty-ounce sausage packs, and it can be converted to work with the ten ounces and twelve-ounce cartridges. The conversion parts are included with the caulking applicator.
This unit is designed with a double gripping plate technology that stops slipping of the caulking material. It also has a swivel barrel that allows you to apply the caulk in perfect beads without having to reposition the applicator in your hands.
5. 3 in 1 Caulking Gun - Perfect for Industrial & Home Use
This is a heavy duty industrial caulking cartridge holder that is crafted from chrome plated pressed steel. It holds the standard ten-ounce caulk tubes.
This caulking gun has a cutter that will cut the end off of caulk tubes, it has a real punch and is also a half barrel caulk applicator. This tool is perfect for both homeowners and professional craftsmen.
This caulk gun weighs 1.1 pounds so it is comfortable to carry and use without causing undue strain in your hands or arms. It is easy to depress the handle and make the caulk come out of the tube.
You can use this tool when applying silicone caulk, latex caulk, acrylic caulk, adhesives,
There is a convenient wrist strap on the handle of the caulking gun so you can easily carry the tool and keep it handy when doing other things.
6. Albion Engineering Caulking Gun
This is a 12:1 best manually operated half barrel caulk gun and adhesive applicator. It is designed with a full handle instead of the short trigger handles so it is comfortable to hold and you have more control over precisely where the caulk or adhesive will go. This reduces wasted materials, messes and messy clean-up.
The cartridges are firmly held in place and they rotate so you do not have to turn your wrist or reposition the caulk applicator to keep the bead line straight and accurate. This is easy to use manually operated tool so beginners and professionals can both get fantastic results from using this device.
It is designed to hold ten-ounce cartridges of standard viscosity materials. It can dispense silicone caulk, acrylic caulks, adhesives and more.
There is a cartridge punch tool built into the applicator and a ladder hook on the end so you can keep your caulking gun close while you do your work.
Buying Guide for Best Caulk Gun for Beginners
If you are going to be applying caulk or adhesive that comes in the 10-ounce tubes then you will need a caulking gun to help you get the caulk out of the tube. You have three basic caulking gun styles to choose from.
Manual Drive Caulking Gun
The manual drive caulking gun has a half barrel cradle that the tube of caulk or adhesive rests in. There is a rod that presses against the bottom of the tube of caulk to apply enough pressure to force the caulk out of the tube. These guns can have a trigger that controls the pressure rod or they can have a full handle that you use the palm of your hand and all of your fingers to depress.
Pneumatic Caulking Gun
The pneumatic caulking gun uses air pressure to force the caulk from the tubes. These caulking guns can also have a trigger handle or a full handle.
Battery Powered Caulking Gun (Electric/Cordless Caulking Gun)
These caulking guns work on the same principle design as the manual caulking guns except the battery power reduces the amount of pressure or force you have to apply to the trigger in order to force the caulk from the gun.
The manually powered, battery powered, and pneumatic caulking guns have a wide variety of features. The following features are commonly found on these caulk applicators:
- Wrist straps that make the caulk gun easier to hold and easier to keep up with
- Built-in seal punchers and built-in cutters eliminate the need for you to9 have a knife to open the caulk tube with
- Rotating frames that will allow the tube of caulk to rotate so you do not have to stop making a bead and reposition the caulking gun so you get a precise bead
- Corrosion resistant materials
- Padded triggers and handles
- Built of lightweight materials so it causes less strain on your arms and wrist when you are using the device
- Ladder hooks on the end of the tube that allow you to hang the caulking gun from your ladder, or from your tool pouch or belt. These handles also allow you to easily hang the caulk from a pegboard in your workroom.
Smooth Action Rods
These rods apply smooth and even pressure to force the caulk from the tube with less strength and pressure. You have more control over the caulk bead when using a caulk gun that has a smooth action rod.
Ratcheting rods are more difficult to use than the smooth action rods. With a ratcheting rod stopping the caulk from being forced from the tube is harder so you have more wasted material and you get more caulk in places where you do not want it.
Open frame caulk guns reduce the amount of material in the applicator so these applicators are lighter and easier to use. These are also called half barrel caulk guns.
The material the caulking gun is designed out of makes a big difference in the weight of the gun. You want to get the lightest caulk gun possible.
Heavier material is said to be more durable so caulk guns made of heavier materials need to be replaced less often.
Frequently Asked Questions
What does the thrust ratio of a caulking gun mean?
The thrust ratio tells you how much force it will take for you to push the caulk from the tube.
Do I need to clean my caulk gun?
Wipe away any caulk or adhesives that gets on your caulk applicator before you put the device away.
Is an air powered caulking gun better than a manually powered device?
The air powered caulking gun is easier to use because the air applies the pressure to the rod, but you also need to have an air compressor and air hose to operate a pneumatic caulking gun.
How to load a manual caulk gun?
First, you need to cut the end of the caulk tube or puncture the seal at the end of the caulk tube so the caulk can flow out of the tube.
Hold the caulking gun in your hand and pull the thrust rod back completely.
Place the caulk tube in the half barrel with the open end of the tube in the notched end of the caulking gun.
Now you press the trigger to pull the rod up so that it is applying pressure to the end of the caulk tube. You will have to depress the trigger several times prior to the caulk being dispensed. Here is a video guide for you
How do I save the caulk in my caulk gun?
One of the problems with caulk and adhesives that are dispensed using a caulking gun is that they often leak out of the tube even when you are finished applying the contents. The tubes remain open and the caulk inside the tube hardens and causes the remainder of the caulk left in the tube to be wasted material.
Most people take a screw or bolt and plug the end of the tube of caulk to make the remainder of the caulk remain inside the tube. When you do this you may have to cut the end of the tube again when you are ready to use the caulk again because the screw may be permanently sealed in the tube by caulk.
Caulk is necessary when you are installing kitchen sinks, bathroom sins, tub surround, shower stalls, doors, windows, vents, and many more things around your home and office. You have to have a best caulk gun to help you apply caulk from a standard 10-ounce caulk tube.
There are several caulk guns available on the market and you have to choose one that is going to do the job you need done and allow you to do less work. You want an easy to use the device but homeowners may not want to buy pneumatic guns because they require air compressors and air hoses to operate.
You want a caulk gun that you can hold comfortably. When shopping for a gun pick them up and see how they feel in your hand. Can you depress the trigger easily or do you have to strain your hand to squeeze the trigger? When you find a gun that you feel comfortable holding then you have found the best caulk gun for you.